[File]

 DescText	= "This is an EDS file created by Gemue/Omron";                                                                                                              
 CreateDate	= 16-05-2008;                                    
 CreateTime	= 14:31:00;                                      
 ModDate	= 16-05-2008;                                       
 ModTime	= 14:31:00;                                         
 Revision	= 1.0;                                             

[Device]
 VendCode    = 0x365;                                         $ Vendor Code
 VendName    = "Omron/GEMUE Apparatebau GmbH & Co. KG";
 ProdType    = 0x0;                                          $ Product Type
 ProdTypeStr = "Generic Device";
 ProdCode    =4220;                                          $ Product Code
 MajRev      = 0x01;                                          $ Major Rev
 MinRev      = 0x01;                                          $ Minor Rev
 ProdName    = "4221/4222DN combi switch box";
 Catalog     = "";

[IO_Info]
 Default     = 0x04;		$ Default I/O Information Entry = COS
 PollInfo    = 0x0f, 1, 1;
 StrobeInfo  = 0x0f, 1, 0;
 COSInfo    = 0x0f, 1, 1;
 CyclicInfo    = 0x0f, 1, 1;

 Input1=
1,			$ The size in bytes that this connection produces. 1 byte
 0,			$ All bits of this connection are significant.
 0x04,			$ Polled, COS and Cyclic I/O; Strobe device.
 "Input1",			$ Name of Connection.
 6,			$ Path length.
 20 04 24 66 30 03,		$ Path to I/O Production Assembly.
 "Bit0:State Valve1 Bit1:State Valve2 Bit2:Mode Bit3:Position Close Bit4:Position Open Bit5:Sensor Error Bit6:Programming Error Bit7: Traveltime Error";

 Output1=
 1,			$ The size in bytes that this connection consumes.
 3,			$ Only the least 3 significant bits of this 
 0x04,			$ Polled, COS and Cyclic I/O; Strobe device.
 "Output1",		$ Name of Connection.
 6,			$ Path length.
 20 04 24 65 30 03,		$ Path to I/O Consume Assembly.
 "Bit0:activate Valve1 Bit1:activate Valve2 Bit2-Bit6 not used Bit7:Reset Traveltime Error";

[ParamClass]

 MaxInst = 18;				$ Number of Instances of the Parameter Class  configurable 1 monitoring
 Descriptor = 9;			$ Stub param instances in eeprom.
 CfgAssembly = 0;			$ no Configuration Assembly

[Params]

 Param1=
 0,				$ reserved for the future
 6,				$ Link Path size
 "20 0F 24 01 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0030,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  scaling, No  scaling links, read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type -16 Bit
 2,				$ Data size 2 Byte
 "Valve Position",		$ Parameter Name
 "%",				$ Units string
 "Position of the programmed valve in percentage value", 				$ Help string
 0,100,0,			$ Min, Max, and Default values
 0,0,0,0,			$ Scaling Multiplier,Scaling Divider,Scaling Base,Scaling Offset	 all not used
 0,0,0,0,0;			$ Multiplier Link, Divider Link, Base Link, Offset Link, Decimal Precision all not used Definitions see Vol.2 Kap. 4-3 ff
 
 Param2 =
 0,
 6,				$ Link Path size
 "20 0F 24 02 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0030,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links, read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "AD-Value real",			$ Parameter Name
 "",
 "The real AD-value of the position.", 
 0,1023,1,			$ Min, Max, and Default values
 0,0,0,0,				$ not used
 0,0,0,0,0;

 Param3 =
 0,				$ reserved for the future
 6,				$ Link Path size
 "20 0F 24 03 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0010,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links, read  only, No  Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type - Unsigned integer 16 Bit
 2,				$ Data size 2 Byte
 "Operating Time",			$ Parameter Name
 "",				$ Units string
 "Shows the operating hours ",	$ Help string
 0,65535,0,			$ Min, Max, and Default values
 0,0,0,0,				$ Scaling Multiplier,Scaling Divider,Scaling Base,Scaling Offset	 all not used
 0,0,0,0,0;			$ Multiplier Link, Divider Link, Base Link, Offset Link, Decimal Precision all not used Definitions see Vol.2 Kap. 4-3 ff

 Param4 =
 0,				$ reserved for the future
 6,				$ Link Path size
 "20 0F 24 04 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0020,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links,No  read  only,  Monitor Parameter, No extended precision scaling
 0xC6,				$ Data Type - Unsigned integer 16 Bit
 1,				$ Data size 2 Byte
 "Threshold Close",			$ Parameter Name
 "%",				$ Units string
 "A valve position in the range 0 to this value will be indicated as valve closed.", 				$ Help string
 3,97,3,				$ Min, Max, and Default values
 0,0,0,0,				$ Scaling Multiplier,Scaling Divider,Scaling Base,Scaling Offset	 all not used
 0,0,0,0,0;			$ Multiplier Link, Divider Link, Base Link, Offset Link, Decimal Precision all not used Definitions see Vol.2 Kap. 4-3 ff

 Param5 =
 0,				$ reserved for the future
 6,				$ Link Path size
 "20 0F 24 05 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0020,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links,No  read  only,  Monitor Parameter, No extended precision scaling
 0xC6,				$ Data Type - Unsigned integer 16 Bit
 1,				$ Data size 2 Byte
 "Threshold Open",			$ Parameter Name
 "%",				$ Units string
 "A valve position in the range 100 to (100-this value) will be indicated as valve open. ", 				$ Help string
 3,97,3,				$ Min, Max, and Default values
 0,0,0,0,				$ Scaling Multiplier,Scaling Divider,Scaling Base,Scaling Offset	 all not used
 0,0,0,0,0;			$ Multiplier Link, Divider Link, Base Link, Offset Link, Decimal Precision all not used Definitions see Vol.2 Kap. 4-3 ff

 Param6 =
 0,				$ reserved for the future
 6,				$ Link Path size
 "20 0F 24 06 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0020,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links,No  read  only,  Monitor Parameter, No extended precision scaling
 0xC6,				$ Data Type - Unsigned integer 8 Bit
 1,				$ Data size 1 Byte
 "Hysteresis Close",		$ Parameter Name
 "",				$ Units string
 "Acts as hysteresis at Threshold Close.", 				$ Help string
 1,5,5,				$ Min, Max, and Default values
 0,0,0,0,				$ Scaling Multiplier,Scaling Divider,Scaling Base,Scaling Offset	 all not used
 0,0,0,0,0;			$ Multiplier Link, Divider Link, Base Link, Offset Link, Decimal Precision all not used Definitions see Vol.2 Kap. 4-3 ff

 Param7 =
 0,				$ reserved for the future
 6,				$ Link Path size
 "20 0F 24 07 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0020,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links,No  read  only,  Monitor Parameter, No extended precision scaling
 0xC6,				$ Data Type - Unsigned integer 8 Bit
 1,				$ Data size 1 Byte
 "Hysteresis Open",			$ Parameter Name
 "",				$ Units string
 "Acts as hysteresis at Threshold Open.", 				$ Help string
 1,5,5,				$ Min, Max, and Default values
 0,0,0,0,				$ Scaling Multiplier,Scaling Divider,Scaling Base,Scaling Offset	 all not used
 0,0,0,0,0;			$ Multiplier Link, Divider Link, Base Link, Offset Link, Decimal Precision all not used Definitions see Vol.2 Kap. 4-3 ff

 Param8 =
 0,
 6,				$ Link Path size
 "20 0F 24 08 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0034,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String, scaling, No  scaling links, read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "Close Time",			$ Parameter Name
 "ms",
 "Valid detected time of the last movement from open to close.", 
 0,10000,0,			$ Min, Max, and Default values
 100,1,1,0,				$ not used
 0,0,0,0,0;

 Param9 =
 0,
 6,				$ Link Path size
 "20 0F 24 09 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0034,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String, scaling, No  scaling links, read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "Open Time",			$ Parameter Name
 "ms",
 "Valid detected time of the last movement from close to open.", 
 0,10000,0,			$ Min, Max, and Default values
 100,1,1,0,				$ not used
 0,0,0,0,0;

 Param10 =
 0,
 6,				$ Link Path size
 "20 0F 24 0A 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0020,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links,No  read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "Set Close Time",			$ Parameter Name
 "",
 "Maximum allowed time for movement open to close before activating an Error.", 
 0,10000,100,			$ Min, Max, and Default values
 0,0,0,0,				$ not used
 0,0,0,0,0;

 Param11 =
 0,
 6,				$ Link Path size
 "20 0F 24 0B 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0020,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links,No  read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "Set Open Time",			$ Parameter Name
 "",
 "Maximum allowed time for movement close to open before activating an Error.", 
 0,10000,100,			$ Min, Max, and Default values
 0,0,0,0,				$ not used
 0,0,0,0,0;

 Param12 =
 0,
 6,				$ Link Path size
 "20 0F 24 0C 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0030,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links,  read  only, Monitor Parameter, No extended precision scaling
 0xC8,				$ Data Type 32 Bit
 4,				$ Data size 4 Byte
 "Valve Cycles",		$ Parameter Name
 "",
 "Counts every valid full cycle of the valve (Open-Close-open or Close-Open-Close).", 
 0,4294967295,0,			$ Min, Max, and Default values
 0,0,0,0,				$ not used
 0,0,0,0,0;

 Param13 =
 0,				$ reserved for the future
 6,				$ Link Path size
 "20 0F 24 0D 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0002,			$ Bit0 - Bit6:  No support for settable path, Enumeration String,  No scaling, No  scaling links,No  read  only,No Monitor Parameter, No extended precision scaling
 0xC6,				$ Data Type -unsigned short 8 Bit
 1,				$ Data size 1 Byte
 "Programming Command",		$ Parameter Name
 "",				$ Units string
 "0=Programming Off, 1=starts automatic Programming, 2=starts manual Programming", 				$ Help string
 0,2,0,				$ Min, Max, and Default values
 0,0,0,0,			$ Scaling Multiplier,Scaling Divider,Scaling Base,Scaling Offset	 all not used
 0,0,0,0,0;			$ Multiplier Link, Divider Link, Base Link, Offset Link, Decimal Precision all not used Definitions see Vol.2 Kap. 4-3 ff

 Param14 =
 0,
 6,				$ Link Path size
 "20 0F 24 0E 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0030,			$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links, read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "Programming counter",			$ Parameter Name
 "",
 "Counts how often the Node was in Programming Mode ", 
 0,65535,0,			$ Min, Max, and Default values
 0,0,0,0,				$ not used
 0,0,0,0,0;

 Param15 =
 0,
 6,				$ Link Path size
 "20 0F 24 0F 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0030,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links, read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "Powerfail counter",			$ Parameter Name
 "",
 "Counts how often the Node was switched off. ", 
 0,65535,0,			$ Min, Max, and Default values
 0,0,0,0,				$ not used
 0,0,0,0,0;

 Param16 =
 0,				$ reserved for the future
 6,				$ Link Path size
 "20 0F 24 10 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0002,				$ Bit0 - Bit6:  No support for settable path, Enumeration String,  No scaling, No  scaling links,No  read  only,No Monitor Parameter, No extended precision scaling
 0xD1,				$ Data Type -unsigned integer 8 Bit
 1,				$ Data size 1 Byte
 "Bus Off State",		$ Parameter Name
 "",				$ Units string
 "State of the Valves in Bus Off State ", 				$ Help string
 0,2,0,				$ Min, Max, and Default values
 0,0,0,0,				$ Scaling Multiplier,Scaling Divider,Scaling Base,Scaling Offset	 all not used
 0,0,0,0,0;			$ Multiplier Link, Divider Link, Base Link, Offset Link, Decimal Precision all not used Definitions see Vol.2 Kap. 4-3 ff

 Param17 =
 0,
 6,				$ Link Path size
 "20 0F 24 11 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0030,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links, read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "Stroke",				$ Parameter Name
 "mm",
 "Returns the value of the programmed stroke depending of the actuator type in 0.1mm (linear) or 0.1° (quarter turn).", 
 0,1000,0,			$ Min, Max, and Default values
 0,0,0,0,				$ not used
 0,0,0,0,0;

 Param18 =
 0,
 6,				$ Link Path size
 "20 0F 24 12 30 01",		$ Link Path "" means Link Path same as Parameter Number
 0x0030,				$ Bit0 - Bit6:  No support for settable path, No Enumeration String,  No scaling, No  scaling links, read  only, Monitor Parameter, No extended precision scaling
 0xC7,				$ Data Type 16 Bit
 2,				$ Data size 2 Byte
 "Min. Stroke",				$ Parameter Name
 "",
 "Shows the minimum valid Stroke in 0.1mm (linear) or 0.1° (quarter turn).", 
 0,1000,0,			$ Min, Max, and Default values
 0,0,0,0,				$ not used
 0,0,0,0,0;



[Groups]
Group1=" Configuration",10,4,5,6,7,8,9,10,11,13,16;
Group2=" Counter",4,3,12,14,15;
Group3="Position",4,1,2,17,18;

[EnumPar]
Param13="Off","Auto","Manual";
Param16="Valve 1","Valve 2","Not Used","Not Used","Not Used","Not Used","Not Used","Not Used";