Introduction
This article provide Modbus Function Blocks.
The attachments include documentations, function block files and CX-Programmer examples
| Type | Unit/PLC | Type | File | Version |
Modbus RTU |
Serial port of CS/CJ/CJ2H/CJ2M/CP1L/CP1H |
Master | MRTU_CPU_Master.zip | 1.1 |
| Slave | MRTU_CPU_Slave.zip | 1.6 | ||
| SCU Serial Gateway Unit |
Master | MRTU_SCU_Master.zip (SerialGateway with Fins cmde 2804) |
1.3 | |
| Slave | Driver integrated (SCU version > V1.1) | |||
Modbus TCP |
Ethernet Unit CJ1W-ETN21 (Unit No fixed to 0) |
Client | MTCP_ETN_Client.zip | 2.4 |
| Server | MTCP_ETN_Server.zip | 2.8 | ||
| Ethernet port of CP1L-EL/CP1L-EM | Client | MTCP_CP1L_Client.zip | 2.7 | |
| Server | MTCP_CP1L_Server.zip | 2.6 | ||
| EthernetIP port of NJ NX Controller | Client | MTCP_Client_NJ.zip | 2.6 | |
| Server | MTCP_Server_NJNX.zip | 2.6 |
Precautions
This article is intended to supplement official Omron documentation. The provided Function Blocks should be thoroughly tested before implementation and may or may not function in specific applications. The user assumes full responsibility of the configuration, integration, performance and application of the provided function blocks. For detailed information on the use and general configuration of Omron products, refer to official Omron manuals or contact your local Omron support representative.
