|
What Is A Substitute Product For Old H7ER Tachometers? 1.It depends on H7ER model. Refer to the following table.
Note:The bottom row gives recommended substitute products or models with substitute functions. For details, refer to the following information. 2.The substitute product in column (1) is H7ER-N. If a wire-wrap terminal was used, Y92S-37 Wire-wrap Terminals (two in one set) must be separately purchased and attached to the terminal block. 3.The substitute product in column (2) is H7ER-NV. If a wire-wrap terminal was used, Y92S-37 Wire-wrap Terminals (two in one set) must be separately purchased and attached to the terminal block. 4.The substitute product in column (3) is H7ER-NV1. If a wire-wrap terminal was used, Y92S-37 Wire-wrap Terminals (two in one set) must be separately purchased and attached to the terminal block. 5.There is no substitute in column (4) because H7ER-N series do not have wide range encoders. The function can be replicated using a pre-scaling function such as the one provided by K3NR Digital Panel Indicator but the size will be significantly different. 6.There is no substitute in column (5) because H7ER-N series do not have PC board mounting models. However, H7ER-N can be used in place of H7ER-P, H7ER-NV in place of H7ER-VP, and H7ER-NV1 in place of H7ER-V2P, if the mounting methods are not considered. 7.General Comparison of H7ER and H7ER-N
Link: |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Comments | ||
|
||