||Request for Force One Coil
||Tsunagi Lab Europe
||OEE-HQ HvB (creation and testing)
||CP1L-EL or CP1L-EM
||Version 9.40 or higher
|Conditions for usage
||The following specifications can be used for FB Auto Allocation:
- CIO 0000 to 6143
- HR H000 to H511
- AR A448 to A959
- D00000 to D09999 for the CP1L-EL
- D00000 to D32767 for the CP1L-EM
||Fn05 Force Single Coil Function Block Forces one Coil ON or OFF conform the variable coil address and value input.
|Kind of FB definition
||Connect Always ON type
Connect the EN input to the Always ON Flag (P_ON)
The same instance cannot be used in two or more places
Omron can not be held responsible in case of malfunction
|EN input condition
||• Connect EN to condition for the FB to Work
• Fn05 send the Request for Force the Coil
• Socket Number 1 to 3
• Coil Address
• (ON/OFF) Value
|• Socket Number 1 to 3
| Output variables
||• This FB requires multiple cycles to process.
• The status of the Outputs bits are Reset if the Fn05 bit is OFF.
||Fn05 Force Single Coil Function Block is designed for use with the other Function Blocks. For more more details on the use of this function block see also CP1L-EL/EM Modbus TCP Client Socket Services.
The Socket Number Output can be used for the Socket Number Input used by:
||CP1L-EM/EL CPU Unit Manual (W516-E1)