With simplicity and cost-effectiveness in mind, the J7 was designed to meet low-end simple applications such as conveyors, fans and pumps in small power applications. With on-line torque compensation the J7 can deliver 100% torque down to 1.5Hz. For quick installation and set-up the J7 is fitted as standard with a digital operator and speed volume. Easy to use. Just WIRE and RUN. Good torque performance: 100% torque at 1.5Hz, 150% at 3 Hz Compact size RS485 and RS232 option unit Programming software: CX-drive for parameter configuration

This modular system consists of main contactors and additional contact blocks. The basic units can be combined with auxiliary contacts (top mounting). Reversed versions, including integrated mechanical interlock, are available as well as 3-main-pole and 4-main-pole versions. 4kW and 5.5kW versions are available Different coil voltages (AC and DC) Mini and normal-size versions are available The contactors can be mounted with screw fixing and snap fitting on a DIN-rail All components are finger proof

Three basic units can be combined with different additional auxiliary contacts. 4-pole, 6-pole and 8-pole versions in different configurations are possible as well as different coil voltages (AC and DC). Accessories such as suppressors are available. Mirror contacts Screw fixing and snap fitting (35mm DIN-rail) Rated current = 10A (I-th) Suitable for electronic devices (DIN 19240) Finger proof (BGV A2)

The J7MN motor starters protect motors against thermal overload and short circuit. The Motor protection circuit breakers can be equipped with additional auxiliary contacts, front or side mounted. Other options are circuit trip alarm units, undervoltage and shunt release units. To make wiring easy we provide as well busbar system. Available rated operational currents to 32 A, 63 A and 100 A Switching capacity is mainly 50 kA/400 V or 100 KA/400 V All Motor Protection Circuit breaker can be mounted on a DIN-rail For the range to 32A we provide electro-mechanical links modules All components are finger proof

J7TKN relays protect motors against thermal overload. They can be mounted on the contactor or separately. The relays comply with IEC 947 (single-phase sensitivity). Series of overload relays covering a setting range from 0.24A to 220A All components are finger proof

Junma compact servo drive with built-in MECHATROLINK-II significantly reduces wiring and set-up time, while saving up to 30% of cabinet space. The Junma series is the first in the world to be fully tuning-free and program-less.

Junma series of ultra-compact, pulse-train-controlled servo drives, significantly reduces set-up time, while saving up to 44% of cabinet space. The series is the first in the world to be fully tuning-free and program-less.

The NS300 is the drive-based solution for simple and reliable positioning using DeviceNet. No programming language is necessary Up to 63 drives can be connected in a network Supports polling I/O and explicit messages Parameters are maintained by the PLC Various positioning modes (homing, multistep and speed positioning

The NS500 is a flexible and simple distributed control over Profibus DP. It connects directly to the Sigma II and has several positioning modes, making it simple to configure.

The NS600 provides flexible and simple distributed control. lt connects directly to the Sigma II and has several positioning modes, making it simple to configure. It supports a standard RS485/422 and discrete I/O control.