D4A-_N has a double seal on the head and a complete gasket cover to ensure a better seal. The housing has been improved to ensure greater shock resistance. Models with fluoro-rubber are available for use in chemical applications. Wide standard operating temperature range: -40°C to 100°C (standard) Block mounting method reduces weight to 260g Block mounting method also reduces downtime for maintenance Meets UL NEMA 3, 4, 4X, 6P, 12 and 13 Immersion-proof IP67

The D4BL guard-lock safety-door switches are available with three built-in contacts. They are mechanically locked when the key is inserted and have a solenoid release. An auxiliary release key ensures easy maintenance and unlocks the door in case of power failure. Automatically mechanical lock Auxiliary release key for easy maintenance Tough aluminium die-cast body Horizontal and vertical conduit opening Head direction can easily be changed

The D4BN family is a complete line-up of safety-limit switches in metal housing. They are available with two built-in contacts and a wide range of head and actuator types. To set up easy installation and maintenance, various conduit types, e.g. M20, are provided. Direct opening mechanism Various actuators Robust metal housing Gold-plated contacts for handling micro loads Metric conduit types available

The D4BS line-up includes two-contact models with 1NC/1NO and 2NC in a robust metal housing. 1 or 3 conduit openings, such as M20 or PG13,5 are available. Robust metal housing Line-up with two contacts: 1NC/1NO and 2NC Standardised gold-clad contacts for high contact reliability Applicable for standard loads and micro loads

The D4C range of switches offers a wide choice of actuators. All switches are liquid and dust resistant, conforming to IEC IP67. Various types are available: pre-wired, low temperature, viscosity resistant, etc. Enclosed miniature limit switch, only 16mm-thick Metal housing with triple-sealed construction LED indicator for easy monitoring Ganged mounting for multiple switching Mechanical life expectancy = 10 million, switching/min = 30

The D4CC family of limit switches comes as standard with a triple-seal construction (IP67), cable connectors for easy switch replacement and an operation indicator for easy monitoring. Miniature limit switch Various models including roller lever Switches are only 16mm-thick with connector Cable connectors for easy switch replacement Immersion proof; IEC IP67, UL and CSA (type 3, 4 and 13)

D4E-_N comes with flat springs that improve the lever ratio of the built-in switch, ensuring smooth snap action and long life expectancy. Its one-touch connector eliminates the need for tedious wiring operations and reduces downtime. Protection cover protects the built-in switch from dust and oil Plunger incorporates a tough, long-lasting seal cap Minute load model with gold cladding is optimal for electronic control IP67

The D4GL guard-lock safety-door switches are available with four or five built-in contacts. When locked, they have a key holding force of up to 1000N. Mechanical lock/solenoid release types and vice versa set up the complete range in combination with various conduit types, e.g. M20. Slim safety-door switch with electromagnetic lock or unlock mechanism Models with four or five built-in contacts Strong key holding force: 1000N For standard loads and micro loads Keys are compatible with D4NL and D4NS

The D4GS line-up includes two- and three-contact models with various contact configurations. D4GS safety-door switches have a cable connection with a length of 1m, 3m or 5m. Slim housing only 17mm wide Line up with up to three contacts: 1NC/1NO, 2NC, 2NC/1NO and 3NC Reversible design allows front or rear mounting Key operation hole with rubber mounting to absorb vibration and shock

D4MC provides users with high precision and a long life (10,000,000 mechanical operations). It is sealed with a gasket diaphragm without use of any adhesive or pin, making it suitable for applications demanding higher mechanical strength and for dust-proof and drip-proof applications. Various models, plungers and levers available Panel-mount versions have the same operating position as the Z basic switch IP67, UL, CSA

The D4N-family is a complete line-up of safety-limit switches. They are available with one, two or three built-in contacts and a wide range of head and actuator types. To set up easy installation and maintenance, various conduit types, e.g. M20 and M12 connector types, are provided. Direct opening mechanism Various actuators Double insulation Gold-plated contacts for handling micro loads Metric conduit types available

D4NH safety-door hinge switches are available with one or two built-in contacts, shaft or arm lever actuator and various conduit types, e.g. M20. Direct opening mechanism Shaft or arm lever actuator Wide temperature range Metric conduit and M12 connector types are available

The D4NL guard-lock safety-door switches are available with four or five built-in contacts. When locked, they have a key holding force of up to 1300N. Mechanical lock/solenoid release types and vice versa set up the complete range in combination with various conduit types, e.g. M20. Safety-door switch with electromagnetic lock or unlock mechanism Models with four or five built-in contacts Strong key holding force: 1300N For standard loads and micro loads Keys are compatible with D4GL and D4NS

The D4NR family is a complete line-up of safety-limit switches with manual reset. They are available with one, two or three built-in contacts and a wide range of actuator types. To set up easy installation and maintenance, various conduit types, e.g. M20 and M12 connector types, are provided. Direct opening mechanism Various actuators Pull-reset switches Gold-plated contacts for handling micro loads Metric conduit types available

The D4NS line-up includes three-contact models with 2NC/1NC and 3NC contact forms in addition to the previous contact forms, 1NC/1NO and 2NC. Models with M12 connectors and conduit opening, such as M20, are also available. Line-up with three contacts: 2NC/1NC and 3NC contact forms Line-up with two contacts 1NC/1NO and 2NC M12 connector types available Standardised gold-clad contacts for high contact reliability Applicable for standard loads and micro loads

This switch is ideal for detecting and measuring wear of cutting tools or for original point of work. Available types have built-in operation, with fibre optic remote operation indicator or with screw-type cable connector for easy installation and maintenance. 1-micron or 3-micron repeat accuracy 24VDC solid-state output or 12VDC/24VAC contact output Ideal for detecting and measuring wear of cutting tools Direct input possible to microprocessors and programmable controllers Immersion-proof IP67

D5B’s detection of objects in multiple directions with high sensitivity makes it an ideal switch for usage in robotics. It operates even with a slight force and a slow-action mechanism is used. Its movement differential is as small as 0.01mm, assuring high accuracy of detection. High-sensitivity mechanical touch switch Detects objects in multiple directions and operates with slight force Movement differential of 0.01mm assures high accuracy of detection Gold-plated contacts capable of switching micro current/voltage load Highly resistant to dust, fine particles, water or oil splashes (IP67)

The D5C is a unique 18mm-dia. capacitive touch switch with a choice of three actuators. It can be activated with only a very slight physical contact. Lightweight objects, such as thin wire or foil, are accurately detected Amplifier, operation indicator and sensitivity adjuster on all models Conforms to IEC IP67 and NEMA Type 6, 6P Actuators can be freely interchanged between switch units Free-attachment type allows the attachment of any kind of actuator antenna

The D5F has a knife-edge mechanism in its optical system, which provides greater precision for a more stable output without faulty contact operation. 4-way high-precision optical switch Actuators have wear-resistant ceramic parts Optical system achieves 1µm operating position repeatability Reduced size and weight (34mm at operating section and 60g total) Immersion-proof IP67

A 'Disk On Module' is a solid state storage device, often taking the place of an IDE HDD. Industrial DOMs offer increased reliability as they have no moving parts to break, wear, or generate heat.

Compact DeviceNet I/O units with extensive diagnostic functions. Data regarding power supply status, I/O response times, operation counters and on-time are continuously recorded and checked against user-defined limits. Any deviation is reported to the control system, as indication to perform machine maintenance and prevent unplanned downtime. Smart DeviceNet I/Os are supported by PLC Function Blocks and HMI Smart Active Parts, allowing program-less visualisation and monitoring from the CJ1 PLCs and NS operator terminals.

Rugged I/O units for field mounting. The DRT2 slave units feature internal diagnostic and maintenance data collection, which can be accessed over the network. Power supply status, I/O response times, operation counters and on-time monitor data is available at all times, and is internally checked against user-defined limits. Maintenance warnings will be generated when limits are exceeded. Using CX-One or NS-series HMI with Smart Active Parts for visualisation, this allows more efficient system setup, commissioning and troubleshooting without any additional programming.

The DeviceNet safety input terminal DST-ID has 12 inputs for safety signals. Four test pulse outputs ensure crosstalk and short-circuit detection. Removable cage-clamp terminals for easy installation 12 inputs for safety signals 4 test pulse outputs to ensure crosstalk and short-circuit detection Status LEDs for advanced diagnostics Mixed-mode operation (safety and standard) for all inputs

The DeviceNet safety I/O-terminal DST-MD has 8 inputs for safety signals and eight solid-state safety outputs with up to 500mA. Four test pulse outputs ensure crosstalk and short-circuit detection of the inputs. Removable cage-clamp terminals for easy installation 8 inputs for safety signals 4 test pulse outputs to ensure crosstalk and short-circuit detection 8 solid-state outputs Status LEDs for advanced diagnostics

The DeviceNet safety I/O-terminal DST-MRD has four inputs for safety signals and four safety relay outputs with up to 2A. Four test pulse outputs ensure crosstalk and short-circuit detection of the inputs. Removable cage-clamp terminals for easy installation 4 inputs for safety signals 4 test pulse outputs to ensure crosstalk and short-circuit detection 4 relay outputs Status LEDs for advanced diagnostics

The DyaloX box industrial PC is created specifically for 24/7 operation and sets new standards in reliability, even in the most demanding industrial environments. A very flexible IPC, the box can be mounted in two different ways. Either separately so that a minimum amount of cabinet space is used, or it can be attached to the back of the touch screen in order to use it as a panel IPC. The DyaloX IPC makes use of Omron’s unique RAS self-diagnostic hardware and software, to ensure that it will keep on running and warn you if conditions become unstable.

The DyaloX panel industrial PC is created specifically for 24/7 operation and sets new standards in reliability, even in the most demanding industrial environments. The panel IPC is available with two different CPUs, namely an expandable 600 MHz model - ideal for running a wide range of basic applications, and a 1.3 GHz model for high-performance applications. Both models offer a choice of 12" and 15" touch panels. The DyaloX IPC makes use of Omron’s unique RAS self-diagnostic hardware and software, to ensure that it will keep on running and warn you if conditions become unstable.

DZ switches are ideal for switching circuits operating on two voltages and for controlling two independent circuits. DZ is interchangeable with Omron Z basic switches, as both switches are identical in mounting-hole dimensions, mounting pitch and pin-plunger position. Incorporates two completely independent built-in switches IP00