New question Review myQuestions

OMRON in Europe Contact us

Search myKnowledge

Login

Username

Password

Register / Forgot password?

OMRON News

22/05/2023 - Certification for the IEC 62443-4-1 International Standard for Industrial Control System Security
20/04/2023 - OMRON celebrates 90 years of innovation at SPS Italia 2023
17/04/2023 - OMRON introduces NX502 controllers with advanced information and safety control
17/04/2023 - German Chancellor Olaf Scholz Visits OMRON's Booth at Hannover Messe 2023
13/04/2023 - OMRON, NOKIA and Dassault Systèmes harness the power of 5G and virtual twins at Hannover Messe

myKnowledge

Main > Product Type > Sensing > Inductive Sensors

Inductive Sensors

Articles

	How Do I Interpret The Catalogue Values For Mutual Interference With Proximity Sensors? Mutual Interference Use Sensors with the same values as the following table or higher when they are mounted facing each other or in parallel. Last Modified - 2009-10-23 - Similar Articles
	Why Does Mutual Interference Occur With Proximity Sensors? If multiple Proximity Sensors are used, mutual interference occurs when the oscillating frequencies of the Sensors are close together. The oscillation widths will interfere Last Modified - 2009-10-23 - Similar Articles
	What Series And Parallel Connections Are Possible With Proximity Sensors? Model Type of connection Connection Description DC 2-Wire Last Modified - 2009-10-23 - Similar Articles
	What Happens If Proximity Sensors Are Used In High Temperatures? The change in the specified sensing distance will be larger than the specified value if Proximity Sensors are used at a temperature higher than the specified operating tempera Last Modified - 2009-10-23 - Similar Articles
	Can General Purpose Proximity Sensors Be Used As The Connection Switch Of F92A Inductive Couplers? Yes, it can be used if the output circuit of Sensors are an open collector. NPN Open Collector Connect Sensors output terminal and the negative terminal to the s Last Modified - 2009-10-23 - Similar Articles
	Why Is It Not Possible To Use Proximity Sensors That Are Not Listed In The Catalogue As Transmittable Proximity Sensors For F92A Inductive Couplers? Proximity Sensors that are not described as Transmittable Proximity Sensors have different oscillating frequencies and oscillation methods, and cannot be used because they are Last Modified - 2009-10-23 - Similar Articles
	What Is The Current Consumption For 2-Wire DC Proximity Sensors? For 2-wire DC Proximity Sensors, the current consumption is the same as the leakage current. The current consumption is 0.8 mA max. for the E2E-X[]D[] 2-wire DC Proximity Last Modified - 2009-10-23 - Similar Articles
	What Is The Construction And The Operating Principle Of The GLS Proximity Sensors? GLS combines a reed switch and a permanent magnet. As shown in the following figure, two reeds of electromagnetic material are inserted opposite each other with a gap in a Last Modified - 2009-10-23 - Similar Articles
	How Many 2-Wire DC Proximity Sensors Can Be Connected To The Input Side Of B7AP Power Couplers? Power Supplied to One Side Up to ten Sensors can be connected if power is supplied only to B7AP-S1 (Stationary Units). 1-1. Connect B7A Input Unit to Last Modified - 2009-10-23 - Similar Articles
	Is It Possible To Extend The Cable Of The Proximity Sensor? Built-in amplifier (the E2E Series, the TL Series) The following will occur. Voltage decreases with resistance component of cable Extension of rise time of output Last Modified - 2009-10-23 - Similar Articles

Search

Glossary

You are not logged in.