What is myOMRON?

Click here to find out

Main > Product Type > Automation Systems > PLCs

The C200HX/HG/HE can be supported with pre-Windows DOS-based and Windows-based Support Software. The C200HX/HG/HE-Z is supported only by Windows-based support software.
The C200HX/HG/HE supports expansion instructions. Some instructions do not have function codes. To make the C200HX/HG/HE-Z compatible with the C200HX/HG/HE, expansion instructions can be set, or 3-digit function codes can be used. Also, symbol instructions can also be used.
Extended Data Memory on the C200HX/HG/HE can only be used with certain instructions. On the C200HX/HG/HE-Z, Extended Data Memory can be used with almost every instruction.

Refer to the following for information on the instructions that have been added to the C200HX/HG/HE-Z.

Are There Comparison Instructions That Can Be Used As The Input Condition For Other Instructions In A Ladder Program? Introduction In a CS/CJ-series PLC CPU Unit, compare instructions can be used as input conditions by using Symbol Comparison Instructions. Symbol Comparison...	Are There Instructions That Directly Make Comparisons (e.g., "Equal", "Less Than", "More Than") So That Comparison Results Do Not Have To Be Accessed From The Status Of Result Flags For Comparison Instructions? The following PLCs support symbol comparison instructions (e.g., "equal (=)", "less than (<)", "more than (>)")....	What Does Error "Failed to Download Expansion Instructions" Mean? The Expansion Instructions are separate instructions that are not standard in the present PLC. These instructions can be downloaded to the PLC via CX-Programmer. You can...

Glossary

You are not logged in.